Systems
FL Inverted Curtain Wall

In this system glazing is mounted with a pressure-applying that it presses and fixing the glass to the supporting structure. About this profile places is a cover exterior, both horizontal as vertical, thus forming a view exterior the two dimensions.

A section of views interior and exterior of the columns and transverses is 65 mm. Both profiles have channels for drainage and ventilation, ensuring together with the system of sealing of EPDM, a tightness and maximum permeability.

Finishes:
• Polyester powder coated colours;
• Wood effect paint
• Anodizing

Opening possibilities:
• This type of façade, unlike all others, allows any type of opening provided by Systems ANICOLOR. The window is fixed to the structure with help of presses profile fixing the glass on the facade.
• There is also the possibility of openings projecting-sliding “hidden”, or be, not seen from the outside.


Categories achieved in the evaluating the FL-Inverted Curtain Wall System in a 2840mm x 6230mm facade with AJi system casement window:
• Air permeability:: Class R4 (EN 12153:2000; EN 12152:2000 testing standards)
• Water tightness: Class RE 750 (EN 12155:2000; EN 12154:2000 testing standards)
• Wind resistance: Apt 1500 Pa (EN 12179:2000; EN 13116:2001 testing standards)

Heat transfer coefficient of the facade with Ug = 1.0 W / m2K insulating double glass with "Warm Edge" interim effect:
• Ucw = 2.23 W/m2K

Areas of application according to RCCTE (depending on the Ug value): I1, I2, I3, V1, V2, V3

To access this information you must be authenticated on this site.

Click here to authenticate or, if you don't have an account, here to create one.

To access this information you must be authenticated on this site.

Click here to authenticate or, if you don't have an account, here to create one.

To access this information you must be authenticated on this site.

Click here to authenticate or, if you don't have an account, here to create one.